4/4 zebrawood
23 x 20 x 13
Zebrawood treated with 5 coats of tung oil
The amp handle is a cast solid bronze door puller manufactured by Gibbons of Wolverhampton
Another link about Gibbons of Wolverhampton
GIBBONS W'HAMPTON trademark
Brass flat head 10-32 cap screws fasten the handle to the cabinet
The amp handle backing plate was custom made from .125 inch thick 17-4 SS
Baffle #1 - offset twelve inch speaker
Baffle #2 - fifteen
Baffle #3 - two tens
Baffle #4 - two 8 inch speakers and four 3 inch speakers
Each 3" speaker has an 8 ohm impedance, is rated 53 watts RMS, weighs 1.23 pounds, and has a frequency response range of 35Hz - 20kHz.
To facilitate swapping baffles, speaker jacks are mounted to custom .090 inch thick 304 stainless brackets.
Fasteners: 18-8 SS 10-24 button head cap screws and lock washers.
The beam diffusers were custom made from .090" thick 304 stainless and coated with black PlastiDip.
Fasteners: stainless steel 6-32 PEM studs with 316 stainless fender washers, lock washers, and nuts.
Click HERE to return to main page.
